Raymarine E-Series Скачать руководство пользователя страница 68

Страница: 68 / 260

• Units of time from the list displayed (available if “record track

interval by” is set to time).

• Units of distance from the list displayed (available if “record

track interval by” is set to distance).

• Greyed out; no options are available if the “record track

interval by” is set to auto).

5.4 Waypoints, routes and tracks storage

capacity

The display can store the following quantities of waypoints, routes

and tracks

Waypoints • 3000 Waypoints

• 100 waypoint groups

Routes

• 150 routes, each consisting of up to 50 waypoints.

Tracks

• 15 tracks, each consisting of up to 10000 track points.

E-Series Widescreen User reference

Содержание E-Series





































































































































































































































































Результаты поиска

Содержание E-Series

Отзывы:

Бренды по названию

Популярные бренды

Raymarine E-Series, Руководство пользователя

Результаты поиска

Содержание E-Series

Отзывы:

Бренды по названию

Популярные бренды