Raymarine E-Series Скачать руководство пользователя страница 255

Страница: 255 / 260

22.3 Cleaning

Best cleaning practices.
When cleaning this product:
• Do NOT wipe the display screen with a dry cloth, as this could

scratch the screen coating.

• Do NOT use abrasive, or acid or ammonia based products.
• Do NOT use a jet wash.

22.4 Cleaning the display case

The display unit is a sealed unit and does not require regular

cleaning. If it is necessary to clean the unit, follow this basic

procedure:
1. Switch off the power to the display.
2. Wipe the display with a clean, soft cloth (a microfibre cloth is

ideal).

3. If necessary, use isopropyl alcohol (IPA) or a mild detergent to

remove grease marks.

Note:

Do NOT use IPA or any other solvent or detergent on the

screen itself.

Note:

In certain conditions, condensation may appear inside the

display screen. This will not harm the unit, and can be cleared by

powering on the display for a short time.

Maintaining your display

255

Содержание E-Series





































































































































































































































































Результаты поиска

Содержание E-Series

Отзывы:

Бренды по названию

Популярные бренды

Raymarine E-Series, Руководство пользователя

Результаты поиска

Содержание E-Series

Отзывы:

Бренды по названию

Популярные бренды