Raymarine Dragonfly 6 Скачать руководство пользователя страница 19

Страница: 19 / 116

3.4 Tools required for installation

1. Power drill.
2. Pozidrive screwdriver.
3. 3 mm (5/32) Allen key.
4. Marine grade sealant.
5. Suitable sized drill bit.
6. Adhesive tape.
7. 18 mm (23/32”) Hole saw (only required if you

are routing the cable through the transom.

Additional tools required

When surface mounting the display the following

additional tools are required.

1. Jigsaw.
2. 32 mm (1 1/4”) hole saw.
3. 7 mm (9/32”) spanner.
4. File.

3.5 Software updates

The software running on the product can be updated.
• Raymarine periodically releases software updates

to improve product performance and add new

features.

• You can update the software for your product using

a connected and compatible multifunction display.

• Refer to

www.raymarine.com/software/

for the

latest software updates and the software update

procedure for your product.

• If in doubt as to the correct procedure for updating

your product software, refer to your dealer or

Raymarine technical support.

Caution: Installing software

updates

The software update process is carried

out at your own risk. Before initiating the

update process ensure you have backed

up any important iles.
Ensure that the unit has a reliable power

supply and that the update process is not

interrupted.
Damage caused by incomplete updates

are not covered by Raymarine warranty.
By downloading the software update

package, you agree to these terms.

Planning the installation

Содержание Dragonfly 6





















































































































Результаты поиска

Содержание Dragonfly 6

Отзывы:

Похожие инструкции для Dragonfly 6

Бренды по названию

Популярные бренды

Raymarine Dragonfly 6, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Dragonfly 6

Отзывы:

Похожие инструкции для Dragonfly 6

Бренды по названию

Популярные бренды