3.1 Getting started
First power up
When you power up your new Multifunction Display (MFD) for the first time a number of actions
are required.
The list below shows the actions that should be performed on your new MFD:
1.
Power
on the display.
2. Select your
Data master
(only required on networks with more than 1 MFD).
3.
Complete the
Startup wizard
(the wizard will not be shown if you are connecting to an existing
system that has already been set up).
4.
Read and agree to the
Limitations on Use
disclaimer.
5. Select/check your preferred
Data sources
, if required.
6. Perform
Engine identification
, if required.
7.
Select/check
Transducer settings
, if required
Powering on the display
When power is available to the MFD but the MFD is switched off, the Power symbol will be illuminated.
To power on the display:
1. Swipe your finger from left to right across the
Power
button swipe area.
The MFD will power up.
Powering off the display
1. Swipe your finger from left to right across the
Power
button swipe area.
The Shortcuts menu is displayed.
2. Press and hold the
Power symbol
until the screen switches off.
Note:
When powered off, the unit may still draw a small amount of power from the battery, if this is
a concern unplug the power supply or switch off at the breaker.
16
