4.3 NMEA 2000 (SeaTalkng ®) connection
The MFD can transmit and receive data from devices connected on a compliant CAN bus network.
The MFD is connected to the backbone using the MFD’s NMEA 2000 connector.
1.
Use the supplied DeviceNet to SeaTalkng ® adaptor cable to connect your MFD to a SeaTalkng ®
backbone.
2. Alternatively your can connect your MFD to a NMEA 2000 backbone using a standard DeviceNet
cable (not supplied).
Note:
1.
SeaTalkng ® and NMEA 2000 devices must be connected to a correctly terminated backbone
that the MFD is also connected to. Devices cannot be connected directly to the MFD.
2. Refer to the instructions supplied with your SeaTalkng ® / NMEA 2000 device for details on
creating a backbone.
35
