Raymarine axiom 12, Руководство по установке, Страница: 16 / 84

2.3 Compatible transducers for Axiom™ MFDs
Depending on your MFD variant you can connect the following transducer types directly to your MFD:
Axiom DV (Using 9–pin connection)
• DownVision™ transducers
• CHIRP conical beam transducers that utilize the 9 pin DownVision™ connector.
• Other transducers can be connected using available adaptor cables. Refer to Chapter 9 Spares
and accessories for a list of available adaptor cables. Refer to the Raymarine® website for
compatible transducers: www.raymarine.com/transducers .
Axiom RV (Using 25–pin connection)
• RealVision™ 3D transducers
• DownVision™ transducers using available adaptor cables. Refer to Chapter 9 Spares and
accessories for a list of available adaptor cables.
• CHIRP conical beam transducers using available adaptor cables. Refer to Chapter 9 Spares and
accessories for a list of available adaptor cables.
• Non-CHIRP transducer can be connected using available adaptor cables. Refer to Chapter 9
Spares and accessories for a list of available adaptor cables. Refer to the Raymarine® website
for compatible transducers: www.raymarine.com/transducers .
Axiom Chartplotter
Axiom Chartplotter only variants require a networked Sonar module to enable Sonar.
RealVision transducers
The transducers listed below can be connected directly to RealVision™ 3D variant MFDs.
1
• RV-100 RealVision™ 3D plastic transom mount transducer (A80464)
2 • RV-200 RealVision™ 3D bronze 0° thru-hull all-in-one transducer (A80465)
• RV-212P and RV-212S RealVision™ 3D bronze 12° thru-hull split-pair transducers
(T70318)
– RV-212P port transducer (A80466)
– RV-212S starboard transducer (A80467)
• RV-220P and RV-220S RealVision™ 3D bronze 20° thru-hull split-pair transducers
(T70319)
– RV-220P port transducer (A80468)
– RV-220S starboard transducer (A80469)
16