Raymarine ALPHA, Руководство по установке, Страница: 48 / 72

11.1 Initial power on test
Before attempting an initial power on test, ensure that you have correctly
networked and powered the performance display in accordance with the
instructions provided throughout the following sections:
• p.37 — Network connections
• p.40 — Power connections
Once the power cable has been connected and adequate power is being
supplied, the performance display will begin to boot.
The performance display will remain on until power is no longer being
supplied to the unit.
• If you are experiencing issues, ensure that you have read and followed the
information listed above before referring to the troubleshooting advice
found within the follow section:
p.51 — Troubleshooting
• For comprehensive operation instruction information, refer
to the documentation listed within the following section:
p.50 — Operation instructions
48