Raymarine A65, Руководство по эксплуатации

Страница: 172 / 390

Navigating a route
You can follow any route stored on the display.
When following a route you visit each waypoint in
order. You may also use the follow route options
in conjunction with a compatible autopilot to
automatically navigate along your chosen route.
D 11751-2
There are a number of ways to select the follow
route option:
• Using a stored route within the route list.
• From a selected waypoint or any leg within
a route.
You can also follow any route in reverse order.
Following a stored route
From the chart application:
1. Select
Menu .
2. Select Navigate .
3. Select Follow Route .
The Route list is displayed.
4. Select the route you want to follow.
5. Select
Follow Route , or
6. Select Follow Route in Reverse to follow the
route in reverse order.
Cancelling navigation of a route
From the chart application:
1. Select the Route.
The route context menu is displayed.
2. Select Stop Follow .
Advancing to the next waypoint in a route
You can skip the current active waypoint and
advance to the next waypoint in a route at any time.
While following a route in the chart application:
1. Select the route.
The route context menu is displayed.
2. Select Advance Waypoint .
Note: If the current destination is the last waypoint,
the chart advances on to the first waypoint in the
route.
14.7 Race Startline and Race Timer
Creating a Race Startline
A Race Startline can be created by placing port and
starboard end points in the Chart application.
The end points can be created by:
• using existing waypoints
• entering the latitude and longitude for each end
point
• pinging your vessels current location
From the Chart application menu:
1. Select
Navigate .
2. Select Race Startline .
3. Select Define Port End .
• Select Ping at Vessel Position to create the
end point at your vessels current location, or
• Select Select Waypoint to choose a waypoint
from the Waypoints list, or
• Select Enter Lat/Long to enter the coordinates
for the end point.
4. Select Back to return to the Race Startline menu.
5. Select Define Starboard End
• Select Ping at Vessel Position to create the
end point at your vessels current location, or
• Select Select Waypoint to choose a waypoint
from the Waypoints list, or
• Select Enter Lat/Long to enter the coordinates
for the end point.
6. Select Back to return to the Race Startline menu.
7. Ensure the Startline: option is set to Show .
8. If required you can swap the port and starboard
end points by selecting Swap Direction .
9. The Race Startline can be removed at any time
by selecting Clear .
Note: Local conditions, including the effects of
tide and wind on committee vessels and startline
should be taken into consideration when using the
Race Startline feature.
172
LightHouse multifunction display operation instructions