Raymarine A65, Руководство по эксплуатации

Страница: 151 / 390

Building a route
You can build a route on a touchscreen multifunction
display by following the steps below.
D 11762-1
From the chart application:
1. Select and hold a location on screen.
The chart context menu is displayed.
2. Select Build Route .
The build route menu is displayed.
3. Select a location on screen to be the starting
position.
4. Select relevant locations to place subsequent
waypoints in order.
The route is saved and displayed as each
waypoint is placed.
5. When complete select Finish Build .
The finish route build pop up message is
displayed.
6. Select Follow to immediately follow the route. or
7. Select Edit to change the route name or change
the route color. or
8. Select Exit to save the route and return to the
chart application.
Note: If you place a waypoint at the wrong
position, select Undo Waypoint from the Route
Menu.
Building a route
From the chart application:
1. Select
Menu .
2. Select Navigate .
3. Select Build Route .
The build route menu is displayed.
4. Select Place Wpt .
5. Using the Joystick select a location on screen.
6. Press the Ok button to place the first waypoint
in the route.
7. Use the Joystick and the Ok button to place
subsequent waypoints.
The route is saved and displayed as each
waypoint is placed.
8. When your route is complete select Finish Build .
The finish route build pop up message is
displayed.
9. Select Follow to immediately follow the route. or
10. Select Edit to change the route name or change
the route color. or
11. Select Exit to save the route and return to the
chart application.
Note: If you place a waypoint at the wrong
position, select Undo Waypoint .
Building a route using the waypoint list
From the chart application:
1. Select
Menu .
2. Select Navigate .
3. Select Build Route .
The build route menu is displayed.
4. Select Use WPT List .
The waypoint list is displayed.
5. Select the required waypoint.
You will be taken back to the build route menu.
6. Add subsequent waypoints to the route.
The route is saved and displayed as each
waypoint is placed.
7. When your route is complete select Finish Build .
The finish route build pop up message is
displayed.
8. Select Follow to immediately follow the route. or
9. Select Edit to change the route name or change
the route color. or
10. Select Exit to save the route and return to the
chart application.
Note: If you select the wrong waypoint, select
Undo Waypoint from the route menu.
Building a route using racemark IDs
You can build a route quickly by entering a list of
racemark IDs. Each Racemark ID must be unique
and must have been entered into the comments field
of the relevant waypoints.
Racemark IDs must:
• only use alpha numeric characters
• not include any spaces
• be separated from any other information in the
field using a space.
From the Chart application menu:
1. Select
My Data .
2. Select Routes .
3. Select Build using racemark IDs .
An instructional pop-up is displayed, unless you
have previously selected
Don’t show again .
Waypoints, Routes and Tracks
151