RAYLASE SP-ICE 2, Руководство по оборудованию

Страница: 12 / 23

Chapter 2
12 RAYLASE SP-ICE 2 MN043 / v1.0.2
The following figure shows the typical scheme of a RAYLASE MINISCAN scan head with
Dig.1 interface. Customer-specific modules are shown dashed. Other connection schemes can
be found in the manual of the respective scan head.
2.4.3 LAN Interface
The SP-ICE 2 control card is designed as LAN component. Via PCI-bus it can be controlled
from the PC, in which it is installed. Connected to a LAN, it can be controlled from every other
PC within the same network. Normally the total communication with the connected PCs is per-
formed via the LAN interface. For stand-alone operation the SP-ICE 2 control card is equipped
with an external LAN connector. The data transmission rate can be 10Mbit/s or 100Mbit/s.
Fig. 2
Connection
example:
MINISCAN
RAYLASE
SP-ICE 2 control card
Driver for RAYLASE control cards
Software:
RAYLASE weldMARK
or
Customer-specific software
PC
Laser system
RAYLASE
MINISCAN
Power supply
XY2-100 cable
M0000001524
Laser interface 1
Deflection unit interface
XY2-100 cable
M0000000797