MT5 Multi-Tracer Operating Manual
page 29
Figure 16. Temperature association edit dialog.
All temperatures of the MT5 system are shown in the left column and the associated
temperatures for the given module are in the right-hand column. By default, the
temperatures are associated as module temperature numbers 1, 2, 3 etc., in the order
they
are added using the “>>” button. However, the order can be changed by selecting
the associated temperature, in the right-
hand column, and using the “Move Up” or
“Move Down” buttons to alter its association number. The “Remove” button will remove
the selected associated temperature.
The “Done” button closes this edit box.
Note: These associations must be saved using the “Apply” button on the module
channel setup page.