Wuhan Raycus Fiber Laser Technology Co., Ltd
User manual QCW450/1500
15
The other end of the power cord is stripped off and each wire is crimped
with a ‘pin-type cable connector’. There are three wires labeled L, N and
PE, respectively. Connect the wires to the AC power supply according to
the labels;
L----Phase Line;
N----Neutral;
PE----Protective Earth;
Figure 9 Lock the Plug with the Lever
4.4 Interface Definitions
4.4.1 SERVICE:
Figure 10 Pin Numbers of SERVICE Port
The pin definitions are listed in
Table 4
.
Table 5 Pin Definitions of SERVICE Port
Pin
Definitions
Note
6
IN
Pin 6 and 7 must be connected
before emitting
7
INTERLOCK-
Other pins are idle.
