Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-P500
3
1.4
Optical Safety
Any dust on the end of the collimator assembly can burn the lens and damage
the laser device.
CAUTION:
DO NOT emit when the protective cap is not removed,
otherwise the lens or crystal will be damaged.
1.5
Electrical Safety
a)
Ensure the product is grounded through the PE line of the AC power cord.
The grounding must be firm and reliable.
WARNING:
Any interruption from the protective earth will electrify
the enclosure, which may result in personal injury.
b)
Ensure that the AC voltage is supplied normally.
CAUTION:
Wrong wiring mode or power supply voltage will cause an
un recoverable damage to the laser device.
1.6
Other Safety Rules
a)
Do not directly view the laser output head when laser emitting. Avoid using
the laser in a dark environment.
b)
Do not use fiber lasers in dark environments.
c)
If this device is used in a manner not specified in this document, the
protection provided by the device may be impaired and the warranty will
be voided.
d)
There are no user serviceable parts, equipment or assemblies inside the
product. All service and maintenance shall be performed by Raycus. In
order to prevent electric shock, please do not break the seal or uncover the
shield. Failure to comply with this instruction will void the warranty.