background image

Wuhan Raycus Fiber Laser Technologies CO., Ltd.

 

                                                                                                                                                                              20QS+/30QS

+Pulsed Fiber LaserUser’s Guide V1

 

 

 

1.

 

Description 

1.1.

 

Product description 

Raycus pulsed laser isan ideal high power laser source with high speed and high efficiency. 

It is specially designed for industrial laser making system and other applications. 

Compared with traditional lasers, pulsed laser has some unique advantages in increasing the 

conversion  efficiency  of  the  pump  light  10  times  higher.Its  low  power  consumption  and 

automotive  design  make  it  appropriate  for  operating  both  in  and  outside  the  lab.  Besides,  it  is 

exquisite  and  convenient  for  its  independence  in  placement,  free  time  in  using  and  facility  in 

connecting to equipment directly. 

The device can emit 1060~1085nm wavelength pulsed light under the control of industrial 

laser’s standard interface driven by 24VDC power source. 

1.2.

 

Actual configuration list 

Table 1. Configuration list 

Items 

Quantity 

Remark 

Fiber Lasermodule 

 

1.3.

 

Environmental requirements and cautions 

Pulsed laser should be driven by 24VDC±1V power source. 

a)

 

Caution: Make sure the corresponding wires of the device are properly grounded. 

b)

 

All the maintenance to the device should only be done by Raycus, because there is no 

replacement  or  accessory  provided  with  the  device.  Please  do  not  try  to  damage  the 

labels or open the cover in order to prevent against electric shock, or the warranty will 

be invalid. 

c)

 

The  output  head  of  the  product  is  connected  with  an  optical  cable.  Please  be  careful 

handling  the  output  head.  Avoid  dirt  and  any  other  contaminations.  Please  use  the 

specialized lens paper when cleaning the lens. Please lid the laser with protective cover 

of the light isolator to be against dirt only when the laser is not installed in the device 

or not in working. 

d)

 

If the operating the device fails to follow this instruction, the  protective function will 

be weakened. Therefore, it should be used under normal conditions. 

e)

 

Do not  install the collimating device into the output head when the laser  device is  in 

working. 

Содержание RFL-P20QS+













Отзывы: