Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C4000XZ~12000XZ
53
8.4 Laserparameterdisplayarea
The display interface for laser parameter display area is as Figure 41. The module status is used to
shield the faulty module, the green light indicates the number of modules installed inside the current laser,
and the check box indicates the module that is actually running in the current laser.
Figure 41 Laser parameter display area display interface
8.5 Alarm type display area
The laser alarm type display area interface is as Figure 42. This interface shows the cause of the
alarm for the current laser.
Figure 42 Laser alarm type display area interface
8.6 PC softwareoperatingmodeselection
The laser operating mode is set by the PC software. Its operating interface is as Figure 43. The
interpretation of the various patterns can be found in Table 16. The programming editing interface is
displayed on the software only when programming mode is selected.
