Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C4000XZ~12000XZ
47
Select IP address of corresponding laser, then double click. PC software will take communication
with selected laser.After the communication established, the lower left status display shows that the
network connection is ok, as Figure 31.
Figure 31 communication status interface between PC software and laser
8.2.1 Add/delete laser
You can add/delete laser in the laser list area by right-click to add/delete In the PC software. You
need to type the IP address of laser to add a new laser. Detailed operation is shown in Figure 32.
Figure 32 Procedure for adding a laser to the PC software
