Raycus RFL-A1000D, Руководство пользователя

Страница: 27 / 40

Wuxi Raycus Fiber Laser Technologies Co., Ltd.
User Guide of Raycus 1000W
～
2000W laser
26
Figure 18 The Steps of Ethernet Connection
4.4 Work Patterns and Control Modes
There are two work patterns for the laser: CW(continuous wave) and pulse
mode. In CW mode, the laser emits continuously. As for pulse mode, The output of
the laser is a pulsed laser, transform the waveform by setting frequency, duty ratio
and the percentage of power.
There are three control modes to choose from, namely external control
RS-232 mode, external control AD mod, and Internal control mode. RS-232 mode
is to set up parameters and control laser enable signal externally. AD mod is to set
up parameters (MOD, Analog Quantity) and control laser enable signal externally.
Internal control mode is to set up parameters and control laser enable signal
internally. Each control modes can be achieved in two work patterns: CW mod,
pulse mode.
4.5 Operating Process
All electrical connections must be finished before the laser is powered up;