Wuxi Raycus Fiber Laser Technologies Co., Ltd.
User Guide of Raycus 1000W
～
2000W laser
10
2.6 Specifications
（
1
）
Ensure reliable grounded before using the laser.
（
2
）
Before supplying the power to the device, make sure that the correct
voltage of the AC power source is used (220VAC or 380VAC). Failure to
connect power source correctly will damage the device.
（
3
）
When the laser is in running state, do not touch the laser machining head.
（
4
）
Do not look directly at the output head. Make sure to wear laser protective
glasses when operating the machine.
（
5
）
Please inspect the output head carefully for dust or other contaminations.
Use appropriate lens paper to clean it if necessary.
（
6
）
The high temperature laser in summer is easy to produce dew and cause
permanent damage. Please make sure that the water cooling machine
stops at the same time when the laser stops.
（
7
）
The freezing of cooling water inside the low-temperature laser in winter
will cause permanent damage. Please ensure the continuous operation of
the water-cooling machine under the shutdown state of the laser.
（
8
）
Failure to follow the specified instructions may result in the loss of laser
power, and such loss will not be covered by the warranty.
2.7 Properties of Products
Table 5 properties of products
Model
RFL-A1000D
RFL-A1500D
RFL-A2000D
Optical Characteristics
Nominal Output Power (W)
1000
1500
2000
Operation Modes
CW/Modulated
Polarization State
Random
Output Power Tunability(%)
10～100
Emission Wavelength(nm)
915±10
