Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-A6000D~10000D
61
Power correction
Click ON, activate laser power correction mode; click OFF, shut laser power correction mode;
mode power-off memory automatically
Eliminate alarm
Eliminate current laser alarm
Laser ON
Laser is in output
Laser OFF
Laser is off
8.3.4 Programming mode test area
The laser programming mode test area interface is shown in Figure 38, in which the ‘START’ button
is used to test the programming of the programming mode. This function can only run internal mode
(when external mode is turned off). Enter the current pre-tested programming number in the digital text
box and click the START button.
Figure 38 Laser programming mode test area display interface
8.3.5 Power slow rise & down parameter setting area
The interface of the laser power slow rise & fall parameter setting area is shown in Figure 39. Click
‘read parameter’ to read the power rise and fall times stored in the laser. Click ‘setting parameters’ to set
a new power rise and fall time. When the rise and fall, times are set to 0, the power slow rise & fall
function is automatically switched off. When there is no 0, the slow rise or fall function is automatically
turned on.
