background image

25

CAUTION: THIS UNIT IS HEAVY, PROPER EQUIPMENT AND ADEQUATE MANPOWER MUST BE USED IN MOVING THE 

RANGE TO AVOID DAMAGE TO THE UNIT OR THE FLOOR.

REMEMBER

, when replacing a part on this appliance, use only spare parts that you can be assured conform to the safety and 

performance specification that we require.  

DO NOT

 use reconditioned or copy parts that have not been clearly authorised by Rayburn.

PLEASE READ THESE INSTRUCTIONS BEFORE USING THIS APPLIANCE  

AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

13.  Installation instructions

DO NOT store or use gasoline or other flammable vapors and liquids in the 

vicinity of this or any other appliance.

Installation and service must be performed by a qualified installer or service 

agency.

WARNING! This appliance must be installed with an appropriate device that 

will allow permanent disconnection of the Live and Neutral conductors. During 

Installation or disconnection prior to any electrical work, the appliance must be 

permanently disconnected from the Supply (Live) and Neutral Conductors.

WARNING!

Please read the Warning, Cautionary notes at the start of this section. 

If the information contained within these instructions is not followed, 

property damage or personal injury may occur.

Содержание LPRT 517931









































Отзывы: