Rayburn 660, Руководство по установке

Страница: 20 / 36

Installation requirements
IMPORTANT: DURING BURNER REMOVAL CARE
MUST BE TAKEN NOT TO DAMAGE THE CERAMIC
FIBRE INSULATION.
SEE FIGS. 13 & 14
COOKER BURNER - SEE FIG. 13
1. Unscrew jubilee clip and remove flexi air intake.
2. Using a 13mm spanner, unscrew top securing bolt
and remove burner by rotating clockwise and drawing
it away from the cooker.
BOILER BURNER - SEE FIG. 14
1. Place a sheet on the floor in front of the cooker to act
as a working area.
2. Remove lower LH door (Rayburn 680KCD C/F only)
and burner aperture cover and store in a safe place.
3. Unscrew jubilee clip and remove flexi air intake pipe
from burner.
4. Using a 13mm spanner. remove top securing bolt and
remove burner by rotating it approximately 90° counter
clockwise drawing it away from the burner.
SEE FIG. 15
10mm copper pipe entering through LH side panel should
be routed through as Fig. 14 and fixed using clips
provided.
20
OIL CONNECTION
Fig. 13
Fig. 14
DESN 515961
DESN 515960
Fig. 15 DESN 516007 A