SEE FIG. 20
Follow instructions in sections BURNER ACCESS, Steps
1 to 3, and BURNER REMOVAL.
1. Remove both HT leads from ignitor.
2. Remove mains plug from ignitor.
3. Remove earth screw.
4. Remove 2 ignitor securing screws.
5. Remove ignitor.
6. Fit new ignitor, re-assemble in reverse order.
NOTE:
Boiler burner must be removed from appliance in
order to gain access to ignitor. See instruction in section
burner removal, boiler burner, steps 1 to 4.
SEE FIG. 21
Follow instructions in sections BURNER ACCESS, Steps
1 to 3, and BURNER REMOVAL.
1.
Remove plug.
2.
Remove solenoid securing nut and washer.
3.
Remove solenoid coil.
4.
Fit new solenoid coil, re-assemble in reverse order.
NOTE:
Boiler burner must be removed from appliance in
order to gain access to solenoid coil. See instruction in
section burner removal, boiler burner, steps 1 to 4.
17
Replacement of parts (Burner)
Fig. 20
DESN 515770
Fig. 21
DESN 515771
SOLENOID COIL
IGNITOR
EARTH
SCREW
Содержание 660
