Rayburn 200S, Инструкция пользователя, Страница: 7 / 17

Both insulating covers should be raised and allowed to
cool before cleaning with a soapy, damp cloth. Use a wire
brush to keep the cast iron hotplate clean. General
cleaning is best carried out when the Rayburn is cool.
IMPORTANT NOTE: Aga recommend Vitreous Enamel
Association approved cleaners for cleaning the vitreous
enamelled surfaces of this product.
But they are unsuitable for use on: chrome and stainless
steel components, including the hand-rails and their
brackets.
The insulating covers should be cleaned regularly with a
NON-ABRASIVE mild detergent, applied with a soft
(coarse free) cloth and lightly polished up afterwards with
a soft (coarse free) duster or tissue to bring it back to its
original lustre.
The firebricks fitted to the Rayburn Cookmaster Plus
212S are of first quality manufacture, and providing the
cooker has been installed and used correctly will have a
reasonable life. They are, however, expendable items and
in time will require renewal.
Replacement bricks either in sets or singly can be
obtained from your Rayburn distributor. Always quote the
manufacturing number.
The manufacturing number, which will be found on a data
plaque inside the ashpit door, should be quoted if any
questions arise in connection with this Rayburn Cooker.
Rayburn Cookmaster Plus 212S
The cooker has been designed to provide a satisfactory
supply of domestic hot water with a normal day’s cooking,
providing the cooker is kept alight overnight and the
system, complete with lagged cylinder, conforms to the
installation instructions.
Always use a qualified service/heating engineer when
servicing is required.
Properly installed and operated, this cooker will not emit
fumes.
Occasional fumes from de-ashing and re-fuelling may
occur but persistent fume emission must not be tolerated.
If fume emission does persist, then the following
immediate action should be taken:
1. Open doors and windows to ventilate room.
2. Let the fire out or remove lit fuel from cooker.
3. Check for flue or chimney blockage, and clean if
required.
4. Do not attempt to re-light the fire until cause of fumes
has been identified, and if necessary, seek
professional advice.
Spares List No
Part Number Description Required
Required
RS4F 3-51-2A
L.H. Side Firebrick 1
RS4F52-7A Middle L.H. Side Firebrick 1
RS4F3-54-8B Top L.H. Side Firebrick 1
RS4F 3-48-4A Bottom R.H. Side Firebrick 1
RS4F 50-5A Top R.H. Side Firebrick 1
RS4F 3-47-3A Bottom Front Firebrick 1
RS1M 90040 Ashpan 1
RSFM 61 Operating Tool 1
Replacement parts if required are available from your
local stockists.
HOT WATER SERVICE
FUME EMISSION WARNING
SPARE PARTS
SERVICING
FIREBRICK REPLACEMENT
6
Fig. 8
Fig. 9