Rayburn 200S Скачать руководство пользователя страница 4

1. Check the flue pipe is free of blockage.
2. Open firebox door.
3. Open ashpit door.
4. Remove ashpan.
5. De-ash (Fig. 3) also see page 3 

De-ashing

and 

remove any dead fuel from bottomgrate as described 
under ‘

Removal of Clinker and Bottomgrate

’.

6. Replace ashpan.
7. Open flue chamber to maximum (Fig. 4).
8. Lay a liberal supply of wood and paper on top of the 

bottomgrate together with a small quantity of fuel and
light.

9.

Close and lock the ashpit door

with the spinwheel 

control open.

10.

Close and lock the firedoor.

11. With fire established, open firebox door and fill firebox

with fuel up to the bottom of the firedoor opening. 

Close and lock the firebox door

. Push flue chamber 

damper back to position which has been found to give 
desired burning rate.

1. Check flue pipe is free of blockage.
2. Open firebox door.
3. Open ashpit door.
4. De-ash (Fig. 3) and insert flay bayonet type gas poker

on top of bottomgrate.

5. Remove ashpan and empty (Fig. 5).
6. Open flue chamber damper to maximum (Fig. 4).
7. Lay a 75-100mm (3”-4”) shallow depth of fuel onto 

the bottomgrate and light gas poker.

8. Close the ashpit and firebox door as far as possible - 

spinwheel control open.

9. When the fuel is well alight, extinguish and remove 

the gas poker, replace the ashpan, then 

close and 

lock the ashpit door

with the spinwheel control 

open, 

close the firedoor

.

10.With the fire established, open the firebox door and fill

firebox with fuel up to the bottom of the firedoor 
opening. 

Close and lock the firebox door

. Push the

flue chamber damper back to position which has been

found to give best results. Set spinwheel control to 
give desired burning rate.

1. The fire controlled by using the spinwheel on the 

ashpit door to govern air supply.

2. The adjustable flue chamber damper is for reducing 

the chimney draught, and the more it can be closed, 
the easier the cooker is to control. The line markings 
on the flue chamber damper enable you to repeat the
best settings to suit your chimney, from 

No.1

in a 

closed position to 

No.6

when fully open.

CONTROL

3

LIGHTING THE FIRE -

USING THE POKER

LIGHTING THE FIRE - 

USING WOOD AND PAPER

Fig. 3

Fig. 4

Fig. 5

Содержание 200S


















Отзывы: