Fast and Furious Arcade
16 |
P a g e
Motion Cabinet Installation
fig. h
1.
Push motion base assembly flush with the joiner bracket (
fig. h
above).
2.
Connect all matching cable and air hose connections inside of the pan of the joiner bracket.
3.
Install (4) ¼-20 x 1
” screws, flat and lock washers
to secure the motion base to the cabinet joiner
bracket and main cabinet (
fig. i
Detail A below).
4.
With the cabinet in the desired location, set all leg levelers on the cabinet and motion base in the
down position.
5.
Use supplied (8) ¼-
20 x ½” screws, lock and flat washers (
fig. i
Detail B below) to secure the cover
plate to the joiner bracket.
fig. i
