Raven viper Скачать руководство пользователя страница 80

Страница: 80 / 182

HAPTER

Viper/Viper 4+ Installation & Operation Manual

SECTION GROUPS AND SECTION SETTINGS

The section groups feature of ROS provides a flexible method for configuring sections for various implement

types. Section groups may be configured for separate “boom systems” or to group various boom sections as

necessary. For example, section groups may be used to configure a tiered boom system, setup control sections on

a row crop planter, or to separate implement sections on a multi-bin air seeder system with liquid booms.

NOTE:

ROS uses the section groups to determine the overall implement or working width when providing

swath guidance during field operations. For assistance with modifying the width used for implement

guidance, refer to the Machine Configuration Tab section on page 76.

VIEW SECTION GROUPS

To view configured section groups:

1. Touch the Edit icon in the machine panel to view the machine devices.
2. Touch the Machine Profile (for self-propelled implements) or Implement Profile (for pull-type implements)

button to access the profile settings.

3. Select the Equipment tab.

NOTE:

When using an implement profile assigned to a machine configuration, use the page navigation at

the bottom of the tab, or swipe across the screen, to access additional implement profiles without

backing out to the machine configuration panel.

The Equipment tab displays the name or description, type, and overview of the configured sections and section

labels for any configured section groups.

4. To:

Edit Section Settings.

Touch the Edit button to access or edit additional section group or

individual section settings. Refer to the Section Settings section on page 73 for more

information on modifying section settings within section groups.

Delete Section Groups.

Touch the Delete button to remove a section group from the machine

or implement.

Create a New Section Group.

Touch the Add button in the next available group to add a new

section group. Use the on-screen keyboard to enter a group name or description for the new

group and refer to the Section Settings section on page 73 for assistance with section settings

within section groups.

NOTE:

The Edit and Delete buttons will only display for configured section groups. If no section groups are

configured, the Add button will be displayed in the first group.

Edit

Machine

Profile

Equipment

Implement

Profile

Add

Edit

Delete

Содержание viper






















































































































































































Результаты поиска

Содержание viper

Отзывы:

Похожие инструкции для viper

Бренды по названию

Популярные бренды

Raven viper, Инструкция по установке и эксплуатации

Результаты поиска

Содержание viper

Отзывы:

Похожие инструкции для viper

Бренды по названию

Популярные бренды