Raven viper Скачать руководство пользователя страница 50

Страница: 50 / 182

HAPTER

Viper/Viper 4+ Installation & Operation Manual

USING THE FILE MANAGER

If desired, edit, rename, and remove files right on the ROS device in the vehicle cabin. Refer to the following

sections for more assistance with using File Manager features.

NOTE:

CAN node update files, or the “canupload” files will be displayed in the file manager. To ensure that

the CAN firmware version information is available on the ROS device, it is recommended not to edit

the file names for the node firmware update files.

If desired, remove all firmware update files from the ROS device after performing any necessary node

updates. Review the Hardware Information and Updates section on page 33 for more information on

downloading and applying CAN node firmware updates.

USING FILTERS AND RENAMING FILES

To use the file filters or rename files:

1. Touch the Administrator or User Panel along the top of the Main Panel display to expand the panel.
2. Select the File Manager utility and touch the File Manager tab. The File Manager tab will display a list of the

following file types currently stored on the ROS device:

•

CAN node updates

•

screen shots

•

core dumps

•

log files

•

job

•

ISO XML

•

prescription (Rx) maps

•

scout groups

•

saved guidance lines

•

street maps

•

agX rec

3. Touch the Filter icon at the top of the “All Files” list to set filters for file type or grower, farm, or field

assignments.

4. To rename a file, touch the file name in the Files list and use the on-screen keyboard to rename the file.

Administrator

or User Panel

File

Manager

File

Manager

Filters Set

Filter

Содержание viper






















































































































































































Результаты поиска

Содержание viper

Отзывы:

Похожие инструкции для viper

Бренды по названию

Популярные бренды

Raven viper, Инструкция по установке и эксплуатации

Результаты поиска

Содержание viper

Отзывы:

Похожие инструкции для viper

Бренды по названию

Популярные бренды