Raven viper, Инструкция по установке и эксплуатации

Страница: 143 / 182

Guidance Screens and Widgets: 135
GUIDANCE SCREENS AND WIDGETS
14
VEHICLE LOCK
In the field review mode, select the vehicle lock icon along the bottom of the display to keep the field review
display centered on the current vehicle position during field operations.
ALARMS
To help the equipment operator make the most informed decisions possible, the ROS device provides active alert
information as well as alert history. When encountering problems in the field, the operator is able to access this
information while troubleshooting to help the operator and support personnel correct potential issues quickly
while in the field.
NOTE: Additional alarm settings may be available for various add on systems or features. Please refer to the
system or feature documentation for assistance with configuring alarms or defining alarm conditions.
Alarms from ISO ECU’s are handled by the VT which has it’s own pop up and audible indicator. Alarms
for ISO ECU’s will not show on the Raven alarm widget or in the Raven alarm history. Alarm settings
do not apply to the ISO ECU alarms.
ACTIVE ALARMS
If an alert or alarm condition is detected during a field operation, ROS will display an alert or alarm notice on the
Alarm icon along the bottom of the display.
To view additional information on active alarm conditions:
1. Touch the Alarms icon along the bottom of the current display.
2. Select the Active Alarms tab. If an alarm condition is currently detected during the field operation, ROS will
display the following alarm details:
Alarm Severity. The alarm severity may be used as an indication of the impact which the
detected condition may have on the operation. A critical error may cause significant
application issues or indicate a severe problem with the system while a notice may be
an indication of a minor issue during which the system is able to function normally.
Regardless of the severity of the alarm, it is recommended to check the alert or alarm
details and address the condition as necessary for the current field operation.
Alarm Information. ROS will provide a short description of the alert or alarm condition to assist the operator
with diagnosing or correcting the cause for the alarm.
Category. The category of the alarm may be helpful when addressing specific alarms to either identify systems or
components which may be encountering or causing the error.
Alarms
Active
Alarms
#1 - Critical
#2 - Alert
#3 - Notice