CHAPTER 3
18
RCM - Sprayer with Sidekick Pro™ ICD Ratio Rate Quick Installation Reference
EXTENSION CABLES
NOTE:
Review Figure 19 on page 21 and Figure 20 on page 22 for additional cabling and connection
information.
Extension cables are available in the following lengths.
•
1.8 m [6 ft] (P/N 115-7300-074)
•
3.6 m [12 ft] (P/N 115-7300-075)
•
4.9 m [16 ft] (P/N 115-7300-076)
•
6.1 m [20 ft] (P/N 115-7300-077)
•
7.3 m [24 ft] (P/N 115-7300-078)
•
8.5 m [28 ft] (P/N 115-7300-079)
•
9.7 m [32 ft] (P/N 115-7300-080)
•
11 m [36 ft] (P/N 115-7300-081)
•
12.2 m [40 ft] (P/N 115-7300-082)
•
14 m [46 ft] (P/N 115-7300-083)
•
16.5 m [54 ft] (P/N 115-7300-084)
•
18.3 m [60 ft] (P/N 115-7300-085)
These cables have a standard 19-pin Deutsch connection. Plug on one end and receptacle on the other. These
cables may be used to extend the existing implement bus communication and power wires to other parts of the
machine.
NOTE:
Depending upon the machine and mounting location of the RCM - Sprayer and the Sidekick Pro ICD
pump, various extension cables may be used to connect the main RCM - Sprayer and Sidekick Pro
ICD cables. Contact a local Raven dealer for additional assistance with IBBC and IBIC harness options,
extension cables, and other available options for interfacing with the ISOBUS.
When adding this system to the existing implement bus, with or without the use of extension cables, the bus must
be terminated at the end of the system. Place a terminator (P/N 115-7300-044) or an IBIC bracket at the end of the
ISOBUS network.
