17
Lit. No. M100V Rev. A 1/3/11
3
.2 Manually Modifying a Raven SNR Vote Group
If you need to modify a vote group at a later time, click on the vote group name in the “System Components”
tree. Changes can be made while the vote group is active, but some changes may not take effect until the
vote group is disabled and then re-enabled.
A tabbed version of the vote group setup
program appears after clicking on the
vote group name. The tabs allow you to
view and set up the same vote group
features that were set up using the
wizard above.
Alternatively, to use the wizard to make
changes to an existing vote group, click
on the “Run Wizard” button.
