LED Indicators
There are seventeen LED indicators on the front panel of the
M4x Blade as shown in Figure 2.
There are two LEDs per Port. The first LED is Red (default is
XMT (Output)). The second LED is Green (default is RCV
(Input)).
There is a Power On LED which is also Green to let the user
know the M4x Blade is powered on.
For more details regarding how the LEDs can be set to indicate
COR (E-Lead) or PTT (M-Lead), please refer to the M4x User
Manual.
M4x Port Pin Outs
On top of each M4x Blade, there are labels with pin out
information for each port installed in the M4x Blade. Please
note, the pin order is grouped for clarity.
Figure 2
Thank you for purchasing the M4x Blade.
When unpacking your M4x Blade confirm the following items
were received with your shipment.
Software CD
This CD also includes the User Manual
AC Power Supply Adapter
120/240 VAC, 12 VDC 2.5 Amp regulated
(Note: on units powered from a DC source, this item
will not be included)
Power Cord
(Note: on units powered from a DC source, this item
will not be included)
USB Cable
If any of these items are missing, please contact Sales at
775-858-2400, press 2.
Installing The M4x Software
Note: Install this software before plugging in the M4x Blade.
1. Uninstall old M4x Software before installing a new version.
2. Install the software by inserting the CD into the computer’s
CD Drive.
3. We recommend selecting “Easy Install” when prompted.
4. Follow the on-screen prompts to complete the installation.
5. Refer to the M4x User Manual included on the software disk
for more detailed installation instructions, (especially if this
version of software will be installed over a prior version of
software).
Powering Up the M4x Blade
1. Connect the Power Cable into the AC Power Adapter.
2. Connect the AC Power Adapter to your AC power source
(e.g. 3-pronged grounded wall outlet). The AC Power
Adapter can be connected to a 100 to 240 VAC, 50-60 Hz,
0.5A source.
3. Connect the DC plug from the AC Power Adapter into the
DC jack on the rear of the M4x Blade as shown in Figure 1.
WWW.RAVENCOMM.COM
1 2 3 4 5 6 7 8
PIN 1 = I/O 1
PIN 2 = I/O 2
PIN 3 = I/O 3
PIN 4 = I/O 4
PIN 5 = I/O 5
PIN 6 = I/O 6
PIN 7 = I/0 7
PIN 8 = I/O 8
MODULE 476-180 I/O
PIN 1 = I/O 9
PIN 2 = I/O 10
PIN 3 = I/O 11
PIN 4 = I/O 12
PIN 5 = I/O 13
PIN 6 = I/O 14
PIN 7 = I/0 15
PIN 8 = I/O 16
PIN 1
PIN 2
PIN 3
PIN 6
PIN 4
PIN 5
PIN 7
PIN 8
MODULE 476-150 4-WIRE INTERFACE
PIN 1
PIN 2
PIN 3
PIN 6
PIN 4
PIN 5
PIN 7
PIN 8
RCV
RCV
XMT
XMT
M-LEAD
M-LEAD
E-LEAD
E-LEAD
PIN 1
PIN 2
PIN 3
PIN 6
PIN 4
PIN 5
PIN 7
PIN 8
MODULE 476-151 4-WIRE INTERFACE
PIN 1
PIN 2
PIN 3
PIN 6
PIN 4
PIN 5
PIN 7
PIN 8
RCV
RCV
XMT
XMT
M-LEAD
M-LEAD
E-LEAD
E-LEAD
MODULE 476-175 SNI
PIN 1 = NC
PIN 2 = NC
PIN 3 = NC
PIN 4
PIN 5
PIN 6 = NC
PIN 7 = NC
PIN 8 = NC
PIN 1 = NC
PIN 2 = NC
PIN 3 = NC
PIN 4 =
PIN 5 =
PIN 6 = NC
PIN 7 = NC
PIN 8 = NC
PSTN
PSTN
PIN 1 = RLY 1 NC
PIN 2 = RLY 1 COM
PIN 3 = RLY 1 NO
PIN 4 = RLY 2 NC
PIN 5 = RLY 2 COM
PIN 6 = RLY 2 NO
PIN 7 = NC
PIN 8 = NC
MODULE 476-178 RELAY
PIN 1 = RLY 3 NC
PIN 2 = RLY 3 COM
PIN 3 = RLY 3 NO
PIN 4 = RLY 4 NC
PIN 5 = RLY 4 COM
PIN 6 = RLY 4 NO
PIN 7 = NC
PIN 8 = NC
PIN 1
PIN 2
PIN 3
PIN 6
PIN 4 = NC
PIN 5 = NC
PIN 7
PIN 8
PIN 1
PIN 2
PIN 3
PIN 6
PIN 4 = NC
PIN 5 = NC
PIN 7
PIN 8
MODULE 476-152 2-WIRE INTERFACE
2WIRE
2WIRE
M-LEAD
M-LEAD
E-LEAD
E-LEAD
PIN 1 = RLY 1 COM
PIN 2 = RLY 1 NO
PIN 3 = RLY 2 COM
PIN 4 = RLY 2 NO
PIN 5 = RLY 3 COM
PIN 6 = RLY 3 NO
PIN 7 = RLY 4 COM
PIN 8 = RLY 4 NO
MODULE 476-178 RELAY OPT – 02
PIN 1 = RLY 5 COM
PIN 2 = RLY 5 NO
PIN 3 = RLY 6 COM
PIN 4 = RLY 6 NO
PIN 5 = RLY 7 COM
PIN 6 = RLY 7 NO
PIN 7 = NC
PIN 8 = NC
PIN 1
PIN 2
PIN 3
PIN 6
PIN 4
PIN 5
PIN 7
PIN 8
4W RCV
M-LEAD
4W XMT/2W
PIN 1
PIN 2
PIN 3
PIN 6
PIN 4
PIN 5
PIN 7
PIN 8
ETH XMT
ETH RCV
ETH SHLD
ETH SHLD
MODULE 476-777 VOIP
M4x Blade Quick Start Guide
Please Read Before You Start
Figure 1
E-LEAD
Note: E-Lead is COR, M-Lead is PTT
Raven Electronics Corporation 4655 Longley Lane, Reno, NV 89502 Main: 775.858.2400 Sales: Press 2 Technical Support: Press 3 Fax: 775.858.2410
DC Jack
USB Port
www.ravencomm.com
