Chapter 3 DVR CONNECTION
3.1 HDD Installation
Caution: Please do not Install or take out hard drive when DVR is running!
HDD Installation:
(1)
Shutdown the DVR by removing the power cord safely, and then remove screws and open DVR upper cover
carefully;
(2)
Insert internal power cord and data cable into pin of hard drive securely;
(3)
Remove the screws on the HDD bracket; fix the HDD to the bracket and then fix the bracket with HDD to DVR body;
(4)
Put the upper cover back carefully, re-attach screws.
Note: If user requires higher performance HDD, strongly recommend you use special hard driver for security and
protection.
3.2 Camera and Monitor Connection
Connect camera cable to video input of DVR, and from video output of DVR to Monitor via BNC connector (Refer to
section2-1 Rear Panel)
If the camera is a PTZ speed dome, you could connect RS485 A & B to the according port of DVR respectively (refer to
system figuration on Chapter 8)
3.3 Power Supply connection
After power on please make sure the video I/O connection well, audio device with BNC cable.
5
Содержание 500QR
Страница 1: ...USER MANUAL www maxxdigital tv ...