Ravas RCS Hy-Q-52, Руководство по установке

Страница: 3 / 37

INSTALLATION MANUAL – RCS Hy-Q-52
3
Table of Contents
1. Introduction 4
2. Warning & Safety measures 4
3. Before the installation 5
3.1 Capacity of the forklift truck 5
3.2 Maximum pressure in the hydraulic system 5
3.3 Battery voltage of the forklift truck 5
3.4 Making the hydraulic system pressure free 5
3.5 The condition of mechanical components of the forklift truck 6
4. Installation 7
4.1 Hydraulics: Installing the T-piece 7
4.2 Hydraulics: Mounting the oil pressure sensor 10
4.3 Mechanics: Installing the position switch holder 11
4.3.a Mechanics: placing stickers to mark reference height 13
4.4 Mechanics: Installing the indicator 14
4.5 Electronics: Mounting the cables 15
4.6 Electronics: Wiring diagrams 16
4.7 Electronics: Connecting the power supply cable 18
4.8 Remove any air from the hydraulic system 18
5. Calibration 19
5.1 Preparing for calibration 19
5.2 Bringing the forklift truck to operating temperature 20
5.3 Operating key functions of indicator 21
5.4 Display functions 21
5.5 Start calibration procedure: first go into the service menu 22
5.6 Set the scale capacity 23
5.7 Change unit label 24
5.8 Set the overload value 24
5.9 Setting the service date 25
5.10 Go into the calibration menu and perform a zero calibration 26
5.11 Execute weight calibration: slow & fast speed 29
5.12 Set zero 30
5.13 Delete a calibration point 30
5.14 Level switch 31
5.14.1 Activate level switch 31
5.14.2 Calibrate level switch 32
6. Parameter settings 33
6.1 Remarks 33
6.2 Parameter settings 34
7. RDC - data transfer 37