Ravas RCS Hy-Q-52 Скачать руководство пользователя страница 2

Страница: 2 / 37

INSTALLATION MANUAL

–

RCS

Hy-Q-52

PLEASE RETAIN THESE ASSEMBLY INSTRUCTIONS FOR FUTURE REFERENCE

If you have any queries concerning the duration and terms of the guarantee, please contact your supplier.

We would also refer you to our General Sale and Supply Conditions, which are available on request.

The manufacturer accepts no liability for any damage or injury caused by failure to follow these instructions,

or from negligent operation or assembly, even if this is not expressly stated in this instruction manual.

In light of our policy of continuous improvement, it is possible that details of the product may differ from

those described in this manual. For this reason, these instructions should only be treated as guidelines for

the installation of the relevant product. This manual has been compiled with all due care, but the manu-

facturer cannot be held responsible for any consequences of errors. All rights are reserved and no part of

this manual may be reproduced in any way.

We would like to inform you about the fact that this RAVAS product is 100% recyclable on the basis that the

parts are processed and disposed off in the right manner.

More information can be found on our website:

www.ravas.com

Содержание RCS Hy-Q-52






































Результаты поиска

Содержание RCS Hy-Q-52

Отзывы:

Похожие инструкции для RCS Hy-Q-52

Бренды по названию

Популярные бренды

Ravas RCS Hy-Q-52, Руководство по установке

Результаты поиска

Содержание RCS Hy-Q-52

Отзывы:

Похожие инструкции для RCS Hy-Q-52

Бренды по названию

Популярные бренды