Ravas RCS Hy-Q-52, Руководство по установке

Страница: 13 / 37

INSTALLATION MANUAL – RCS Hy-Q-52
13
Align the lowest switch of the holder with
the magnet; there should be 5-20mm
clearance in between.
Lift the forks 20 cm, so the magnet is
positioned in front of the upper switch.
Align the top switch with the magnet; there
should be 5-20mm clearance in between
and fix the holder.
40 cm
5 - 20 mm
5 - 20 mm
20 cm
4.3.a Mechanics: placing stickers to mark the reference height - optional
Three yellow triangular stickers are
supplied with this kit. Two of these stickers
are placed on the mast and one on the
carriage plate. The arrow stickers are used
to mark the reference height.
Note:
• Make sure the driver can see all three
stickers;
• The sticker on the carriage plate must
be placed in the proximity of the mag-
net (1);
• The top sticker on the mast must be
placed 10cm above the beam with the
switches (2);
• The bottom sticker must be placed
10cm below the beam with the switches
(3).