1. Introduction
2. Warning & Safety measures
When using the
iCP
, please observe the instructions
and guidelines contained in this manual carefully.
Always perform each step in the rigth sequence. If any of the
instructions is not clear, please contact RAVAS.
This manual describes the installation and use of the
iCP
. Read this manual carefully. The
installer must be informed of the contents of this manual. Always do things in the correct order.
This manual should be kept on a safe and dry place. In case of damage or loss the user may
request a new copy of the manual from RAVAS.
•
All safety regulations that apply to the truck remain valid and unchanged;
•
No weighing operations are allowed if any person or object is in the vicinity; around,
under or close to the load;
•
RAVAS is not responsible for any physical harm done to the operator as a result of
coming into contact with the indicator in the cabin;
•
Any modifications done to the system must be approved in writing by the supplier, prior to
any work being completed;
•
It is the sole responsibility of the purchaser to train their own employees in the proper use
and maintenance of this equipment;
•
Do not operate this unit unless you have been fully trained in its capabilities;
•
Check the accuracy of the scale on a regular basis to prevent faulty readings;
•
Only trained and authorized personnel are allowed to service the scale;
•
Always follow the operating, maintenance and repair instructions of this truck and ask the
supplier when in doubt;
•
RAVAS is not responsible for errors that occur due to incorrect weightings or inaccurate
scales.
Should you have any further questions after reading this manual then you can contact us at:
RAVAS USA, INC.
1500 Enterprise Pkwy
Twinsbrug, OH, 44087
United States
IP65
min -10°C
15°F
0
0
max 40°C
105°F
READ
CAREFULLY
!
Phone:+1 (330) 425-3092
Email:
Website:
www.ravas.com
USER MANUAL
-
iCP
4
