Ravaglioli YUCON T700, Техническое руководство, Страница: 30 / 50

12 SETTING UP BEFORE USING
This chapter describes the maintenance operations required for setting up the equipment.
12.1 How to Fill the Bottles
The bottles provided with the device are empty upon delivery.
The OIL and UV bottles must be filled before use.
Fill the oil bottle with the correct type of oil (PAG/POE).
Proceed as follows:
1.
Remove the desired bottle by slightly pulling back the ferrule on the
pneumatic coupler.
2.
Unscrew the tank cap.
3.
Fill the bottle with oil/UV tracer.
4.
Screw the tank cap back on.
5.
Reinsert the bottle by slightly pulling back the ferrule on the pneumatic
coupler.
12.2 How to Fill the Internal Tank
Internal tank in the device is empty upon delivery.
You must carefully read and understand this Operating
Manual in order to perform the provided instructions
correctly.
Proceed as follows:
1. Turn on the equipment.
2. Launch the software function for the internal tank filling by selecting ADDITIONAL
FUNCTIONS in the menu.
3. Follow the on-screen instructions.
For further information see the software's Operating Manual.
en | 29 | YUCON |
Ravaglioli | 2024-03-01