minCam Manual
6
5.2 Camera Information
5.2.1 Focus
The minCam360 has automatic mechanical focus.
5.2.2 Zoom
The minCam360 has 4 step digital zoom: 0, 1, 2, and 3
Controlled by:
or
5.2.3 Lighting
The light intensity can be adjusted using the buttons on the remote, control unit, or via a
command on the keyboard. There are 8 steps of lighting.
Controlled by:
or
Pressing the
button turns on all 10 LEDs to maximum level.
5.2.4 Fine tuning camera sensor module
Fine tuning enables custom camera sensor settings for extreme surroundings.
Brightness:
and
or
Color:
and
or
AGC:
and
or
Mirror Image:
and
or
Restarting the system resets all camera sensor adjustments to the original parameters.
5.2.5 Sonde (location transmitter)
After activating the sonde, the frequency is shown in the middle of the bottom line.
1 Press:
512 Hz active
2 Press:
33 kHz active
3 Press:
640 Hz active
Controlled by:
5.2.6 Camera head pressure
The camera head is nitrogen-pressurized for leak prevention.
Pump up the camera head with nitrogen when there is a decrease in camera head pressure.
There is an on-screen indicator accessed via the keyboard (Shift + F1), or you can use the
included air pump with pressure indicator.
The air pump included in the accessory case should be used in warm air environments only.
