KI-1981A MRC7600—Installation, Programming and Operations Manual
Page 28 of 48 (06/30/98)
4.
Use the mouse to highlight and then the delete key to remove the existing entry.
5.
Enter the new command code into the box provided at the right of the button.
6.
Click on the
Send MRC Data
button.
¾
The data will be sent to the MRC7601.
7.
Repeat as necessary.
Editing Key Text: Step by Step
TMRC allows you to enter a description of each of the user-defined buttons.
Descriptions appear adjacent to corresponding buttons in the
VCR Key Mapping
Window
. Descriptions are limited to a maximum of 10 alphanumeric characters,
may be saved to disk (not download to or uploaded from the MRC7601), and are
assigned in the following manner:
1.
Click on the
Edit Key Text
button.
¾
The VCR Key Text window will appear:
2.
Use the mouse to position the cursor in the desired field.
3.
Type an alphanumeric description that does not exceed ten characters.
4.
Click
OK
.
5.
Click
Save to Disk
.