KI-1981A MRC7600—Installation, Programming and Operations Manual
Page 21 of 48 (06/30/98)
Step-by-Step
1.
Connect to the MRC7601 using the TMRC.
2.
Click on
'RZQORDG )LUPZDUH
located on the main TMRC menu:
¾
The
+H[ )LOH 'RZQORDG
window will appear:
Click on
Select File.
¾
The
Select Code File
window will appear.
1.
Find and select the appropriate hex file using the
Folders and File Names
lists in the
Select Code File
window.
2.
Click on
Download File
.
¾
A warning window will appear.
3.
Click
OK
to continue.
¾
The downloading process will begin.
¾
The
&RGH 'RZQORDG 6WDWXV
area at the bottom of the
+H[ )LOH 'RZQORDG
window will show transfer status.
¾
The LED located on the front of the MRC7601 board will remain lit during the entire
download.
¾
If the download is successful, the
+H[ )LOH 6XFFHVVIXOO\ 'RZQORDGHG
message
will pop up and the LED will flash the RAM firmware version number.
4.
Click
2.
to the message.
¾
The
+H[ 'RZQORDG
window will reappear. (Skip to step 9.)
¾
If the download was incomplete or unsuccessful, the
5HPRWH
'HYLFH 1RW
5HVSRQGLQJ
message will appear and the LED will flash on and off continuously.