Rauch SA 121, Руководство оператора

Страница: 68 / 90

9.9 Discharging residual material
WARNING!
Risk of injury due to rotating machine parts
Rotating machine components (universal drive shaft, spreading disc) may catch and pull-in body
parts or objects. Contact with rotating machine components may cause bruises, abrasions and
crushing injuries.
Ejected spreading material may cause injury.
u
Always stay outside the area of rotating machine components while the machine is running.
u
Ensure that nobody is present in the hazard zone of the machine.
To maintain the value of your machine, discharge the hopper immediately after every use.
u
Deactivate the drive and switch off the tractor motor.
u For collecting the spreading material, place a foil under the machine or position a sufficiently sized
hopper beneath the outlet.
u
Lower the spreading width limiter completely.
u Open the metering slide fully.
u
Deactivate the tractor motor and the drive of the machine and empty the hopper until no
spreading material is discharged.
u Switch off the machine drive and the tractor engine and lock them to prevent unauthorized
starting. Remove the ignition key of the tractor.
u
While the metering slide is open, move the drop point back and forth until the last spreading
material residues have fallen out.
9.10 Parking and unhitching the machine
DANGER!
Crushing hazard between the tractor and the machine
Persons standing between the tractor and the machine while they are being parked or decoupled
are in lethal danger.
u
Ensure that nobody is present in the hazard zone between the tractor and the machine.
Requirements for parking the machine:
• Only park the machine on level, solid ground.
• Only park the machine when the hopper is empty.
• Relieve the load on the coupling points (lower / upper link) before removing the machine.
• After unhitching, place the universal drive shaft, hydraulic hoses, and electric cables in the
retainers provided for the purpose.
9. Spreading operation
68
5901026 SA 121