Rauch SA 121, Руководство оператора

Страница: 57 / 90

u Close the metering slides completely.
u
Push the locking mechanism [4] to the right, in the direction of the adjustment lever for the right-
hand metering slide.
u Position the stop [2] at the lower end of the numeric scale or on the greater value for both
metering slides.
u
Push the adjustment lever for the metering slide [3] or [5] to the determined position.
9.5 Set the spreading width limiter
Thanks to the different positions, the spreading width limiter makes it possible to adjust the spreading
widths from approx.
0.8 m - 5 m at a mounting height of approx. 50 cm (see Setting the mounting
height )
Check to make sure that the spreading width limiter is in good condition. Damaged or bent
elements of the spreading width limiter impact the spreading pattern.
Fig. 24: Spreading width limiter
[1] Adjustment lever
[2] Perforated arch
[3] Segment panels
9. Spreading operation
SA 121 5901026
57