Rauch SA 121, Руководство оператора

Страница: 47 / 90

7.6.2 Spreading density on the left in direction of travel
u
Dismount the screws of the spreading vanes with the respective nuts and washers.
Fig. 21: Spreading density on the right in direction of travel
White arrow: Rotational direction of
spreading disc Grey arrow: Adjustment of the spreading
vanes in the rotary direction of the
spreading disc
u Set the spreading vanes forward against the rotary direction of the spreading disc.
With this setting, the spreading material is ejected later.
u
Screw on the spreading vane (tightening torque: approx. 18 Nm). For this purpose, always use
new self-locking nuts.
The spreading density on the left-hand side viewed in the direction of travel is increased.
7.7 Filling the machine
DANGER!
Danger of injury due to running engine
Working on the machine with the engine running may result in serious injury caused by mechanical
components and escaping spreading material.
u
Wait until all moving parts have come to a complete stop before making any adjustments or
performing maintenance work.
u
Switch off the tractor engine.
u
Remove the ignition key.
u
Ensure that nobody is present in the hazard zone .
7. Commissioning
SA 121 5901026
47