Rauch QUANTRON-K2, Инструкция по эксплуатации

Страница: 82 / 102

Spreading operation using the QUANTRON-K2 Control unit 5
76
5.2.5 Adjusting the spreading width with the Dispersion AUTO function and actuator for
the half-side slide
Winter service spreader with HydroControl (Q-100-HC, Q-200-HC)

Press the L/R key multiple times until the display shows the symbols [1] for
adjusting the left or right spreading width.
Figure 5.9: Working width adjustment (Dispersion AUTO function activated)
When adjusting the spreading width limitation [3] using the F1 and F2 [1] function
keys, the QUANTRON-K2 control unit automatically adjusts the disc speed [2],
the position of the metering slide [4] (depending on the forward speed) as well as
the position of the half-side slide [5].
Winter service spreader without HydroControl (Q, Q-100, Q-200)

Press the L/R key multiple times until the display shows the symbols [1] for
adjusting the left or right spreading width.
When adjusting the spreading width limitation [3] using the F1 and F2 [1] function
keys, the QUANTRON-K2 control unit automatically adjusts the position of the
metering slide [4] (depending on the forward speed) as well as the position of the
half-side slide [5].
5.3 Half-side slide
If the half-side slide at the winter service spreader is adjusted (closed position),
the QUANTRON-K2 control unit displays the respective symbol on the operating
screen.

See Figure 2.3 in the 2.4: Display, page 9 sub-chapter.
4
5
2
3
1
NOTICE
The half-side slide cannot be controlled by the QUANTRON-K2 control unit.
The symbol on the operating screen is only for information.

Observe the operating manual for the AXEO winter spreader and especially
the
Machine settings chapter.