Rauch QUANTRON-K2, Инструкция по эксплуатации

Страница: 55 / 102

Operation QUANTRON-K2
49
4
4.6.6 Dispersion AUTO
Activating the Dispersion AUTO function allows you to automatically adjust the
position of the metering slide, the position of the half-side slide and the disc speed
(
HydroControl option) when adjusting the working width.
The half-side slide has three pre-defined positions:

Position 0: The half-side slide is open

Position 2.5: The half-side slide closes 25% of the metering opening

Position 5: The half-side slide closes 50% of the metering opening
1. Call up the Machine settings > Dispersion AUTO submenu.
2. Press the Enter key .
 A check mark is shown in the display.
 The function is activated.
4.6.7 Speed +/- (HydroControl option)
In the Speed +/- function, you can pre-configured a value by which the disc
speed is decreased by pressing function key F1 or increased by pressing function
key F2 .
1. Call up the Machine settings > Speed +/- submenu.
2. Enter the RPM by which the disc speed is to be increased/decreased.
Entering values into the control unit is described in chapter 4.11.2: Input of values
using the cursor keys, page 65 .
3. Press the Enter key .
NOTICE
The Speed +/- can only be set when the Dispersion AUTO function is deac-
tivated !