Rauch QUANTRON-A, Инструкция по эксплуатации

Страница: 99 / 120

Spreading operation using the QUANTRON-A control unit
93
5
5.2.2 Spreading operation with one section width in border spreading mode (AXIS-M V8)
During the spreading operation, the section widths can be changed gradually and
border spreading activated. The figure below shows the operating screen with
activated border spreading and selected section widths.
Figure 5.2: Operating screen, one section width on the left, border spreading
side on the right
[1] Quantity change in boundary spreading mode
[2] Right spreading side in border spreading mode
[3] Right spreading side is activated
[4] Reduce or increase section width on the left
[5] Left section width adjustable in four steps (VariSpread 8)

The spreading quantity on the left is set to the full working width.

The Right border spreading function key has been pressed, border spread-
ing has been activated and the application rate has been reduced by 20%.

Press the Reduce left spreading width function key in order to reduce the
section width by one step.

Press the C/100% function key to immediately return to the full working width.

Only for TELIMAT versions without a sensor: By pressing the T key, border
spreading is deactivated.
3
5 1
2
4