Rauch QUANTRON-A, Инструкция по эксплуатации

Страница: 84 / 120

Operation QUANTRON-A 4
78
4.10.4 Test/diagnosis
In the Test/diagnosis menu, you can monitor and test the function of some
sensors/actuators.
NOTICE
This menu is for information purposes only.
The list of sensors depends on the equipment of the machine.
Sub-menu Meaning Description
Test points slider Test for moving to the various
positioning points of the sliders. Checking the
calibration
Metering slider Approaching the left and right meter-
ing slider Page 79
Voltage Checking the operating voltage.
Level sensor Checking the level sensors
Weigh cells Checking the weigh cells.
M EMC Checking the sensors for the M EMC
function.
Test points drop pt. Test for moving to the various position
points of the drop point. Checking the
calibration
Drop point Moving to the drop point.
Linbus Checking the assemblies registered
via LINBUS.
TELIMAT sensor Checking TELIMAT sensors
Hopper cover Checking the actuators.