Rauch MDS 8.2, Инструкция по эксплуатации

Страница: 35 / 146

Technical data
29
4
4.4 List of available accessories
4.4.1 Extensions
The capacity of the machine can be increased by fitting a hopper extension.
For the machines MDS 18.2 and MDS 20.2, four-sided extensions are available
with different hopper capacities.
The extensions are bolted to the standard hopper.
4.4.2 Hopper cover
A hopper cover can be fitted to protect the spreading material from rain and mois-
ture.
The hopper cover is screwed both to the main hopper as well as to the addition-
ally mounted hopper extensions.
4.4.3 RFZ 7 (all versions except MDS 8.2)
This 7-row spreading device can be used to place dry, granular fertiliser in a row
next to sprouting plants.
A separate operator’s manual is supplied with each row spreading device.
4.4.4 TELIMAT T1
The TELIMAT is used for remote-controlled full and limited border spreading from
the tramline (left).
A double-acting valve is required for the operation of the TELIMAT T1.
NOTICE
For an overview of extensions and extension combinations, see chapter 4.3.3:
Technical data of the extensions, page 28 .
Hopper cover Application
AP 13

Standard unit MDS 14.2
AP 19

Standard unit MDS 18.2/20.2

Extensions: M 430, M 630
AP 240

Extensions: M 800, M 1100
NOTICE
You can find information about spreading with this special equipment in chapter
10.5: TELIMAT T1 (optional equipment), page 95 .