Rauch K 51, Инструкция по эксплуатации

Страница: 34 / 64

Commissioning 6
28
6.5 Filling the machine
Check the following specific requirements:
 Are both the tractor and the machine in a reliable condition?
 Is the tractor equipped with a towing device?
 Is the machine securely positioned on level and solid ground?
Instructions on filling the machine

Close the metering slide.

When determining the maximum admissible loading amount, consider the
specific weight of the spreading material (kg/l).
- The weight of the spreading material depends on the type of spreading
material (e. g. grit, sand, fertiliser) and its state (dry, wet).

If the machine is mounted to the tractor, secure the tractor against rolling
away. To achieve this, apply the handbrake.
 Use a shovel or a bucket for loading.
 Fill the machine up to the edge maximally.
n
DANGER
Danger to life due to unsuitable tractor
Using an unsuitable tractor for the machine may result in severe
accidents during operation or road travel.

Only use tractors that comply with the technical require-
ments of the machine.

Use the vehicle's documentation to check if your tractor is
suitable for the machine.
n
CAUTION
Inadmissible overall weight
If the permissible total weight is exceeded, this will affect the oper-
ating and road safety of the vehicle (machine and tractor) and may
cause serious damage to the machine and the environment.

Before you start filling, calculate the amount you can load.

Comply with the permissible overall weight.
NOTICE
You can protect the spreading material while travelling to the location where the
machine will be used by decoupling the drive from the agitator.