Rauch AXIS-M 20.2 EMC, Инструкция по эксплуатации

Страница: 187 / 236

Spreading operation
167
B
AXIS
50.2
B.5.3 Adjusting the drop point
AXIS 50.2 D
With the selection of the spreading disc type, you can specify a particular range
for the working width. By altering the drop point, the working width can be accu-
rately set and adjustments to different fertiliser types can be made.
You can set the drop point via the upper scale arc.

Adjusting in the direction of smaller numbers: The fertiliser is ejected
sooner. This results in spreading patterns for smaller working widths.

Adjusting in the direction of larger numbers: The fertiliser is ejected later
and spread more towards the outside into the overlap zones. This results in
spreading patterns for larger working widths.
Figure 6: Adjustment centre for drop point
1. Determine the position for the drop point in the fertiliser chart or by carrying
out a test using the practice test kit (optional equipment).
2. Grip the left and right handle.
3. Press the pointer unit.
 The lock is released. The adjustment centre can be moved.
4. Move the adjustment centre with the pointer to the calculated position.
5. Release the pointer unit.
 The adjustment centre is locked.
6. Ensure that the adjustment centre is locked.
K
D
R
C
Q
W